Thursday, December 20, 2007

Shellac Gone Bad

Shellac is an excellent finish, not necessarily for table tops (because it's not very protective), but for other projects that won't see too much traffic. A couple of things that make shellac so great are its ease of application and the speed at which it dries. However, shellac does have a relatively short shelf life. If you mix your own, you have at most 6 months until it goes bad. If you use premixed shellac, like Zinsser, you have about one year to use it once you open the lid.

I found out the hard way not to push my luck.

I was asked to build some decorative boxes for my church that needed to be ready in time for a very important day. Knowing I was going to use shellac for the finish, I allowed only one day to apply the finish—the day before the important event. After applying 3 coats, I wondered where all the blotchy, shiny spots were coming from. They would rub out momentarily with steel wool, only to reappear a short time later.

Ugh. All that careful construction and the finish made the boxes look horrible. I took them to the Woodcraft Store to consult my buddy, Dan the Finishing Guru, who immediately deduced that I had used old shellac. Friends, old shellac will never, ever, ever dry. It will always have blotchy, shiny spots and will completely undermine your meticulous craftsmanship.

Fortunately, there's another great thing about shellac—it's easy to remove! A little denatured alcohol dissolved all of it. So I mixed a fresh batch, applied several coats, rubbed out the finish the next morning, and had a whole 15 minutes to spare before the big event. Whew!

So how do you determine if your shellac has crossed over to the dark side? Brush some on a piece of wood. If, after 15 minutes, it's not completely dry and looks blotchy....throw-it-out!*

Do you see all of the tell-tale shiny spots at the top of my tool cabinet door?

Yeah, I'll fix that someday.

*Dan, the finishing guru, says to put a dollup of shellac on a piece of glass, let it sit overnight, and if you can press your fingernail into it the next day, mix up a fresh batch.

5 comments:

LadyBurg said...

I remember that. It was horrible. So much work!

You know, I can't see it on the door, maybe its just the picture or maybe I have a very untrained eye!

Kari Hultman said...

Next time you're over, I'll be sure to show you all the boo-boos.
(Hope you had a great birthday today!)

Unknown said...

So you are saying that old shellac is bad, okay.

Anonymous said...

Does use of a spray can of "get rid of the oxygen" type products extend the shelf life at all?

Kari Hultman said...

Hi Matthew, I didn't know the answer to your question so I did a quick search on the web. Michael Dresden (author of finishing books) has a page of info on shellac and recommends a product called SealCoat, a long shelf life shellac resin, but he doesn't address your particular question. His article is found here:
www.michaeldresdner.com
/archives/shellacGoBad.htm

I poked around at a few other sites, but still wasn't able to find an answer to your question. I did however find people who said that Zinsser pre-mixed shellac will last 3 years and those who said shellac mixed from flakes lasts only 2-3 months.

The best way to be sure it's still good is to test it. Sorry I couldn't be of more help.