What Happened to the Links?

In an effort to organize my link list and make it easier to find what you're looking for, I set up another blog for this sole purpose.  You can find a link to the new blog in the sidebar.

Since Blogger is a free service, I don't have the option to include another page, so this seemed like the best solution.

In upcoming days, I'll try to make things even easier to navigate.  

If I inadvertently deleted someone from the list, please let me know.

My Top Ten Woodworking Books

Here is a link to my list.

Some people have emailed me and suggested that I read the books by James Krenov, George Nakashima, and Eric Sloane, but I'd like to hear your recommendations as well. 

What books are your must-haves and why?

Beveled Drawer Bottoms

Why bevel a drawer bottom? No one sees it, right?

Maybe not, but if they do, it can be an impressive discovery.

Beveled drawer bottoms that are fitted into grooves are found in some antique furniture, but I have also seen flat and beveled boards that were nailed or pegged to the bottom edges of the drawer sides.

I can think of 4 possible reasons why woodworkers might have beveled their drawer bottoms, but if you know for sure, please feel free to comment.

Beveled drawer bottoms:

1. Feel substantial. Rap on a thin drawer bottom and it sounds hollow, and may even rattle if it's fitted into grooves, but a beveled one feels and sounds solid.

2. Add an elegant and finished look.

3. Take less time to make than it would if you had to reduce the thickness of the board along its entire width with a handplane.

4. May have been a signature design element for some cabinetmakers.

Moreover, they are simple to make.

Begin by laying out pencil lines on the face of the board that indicate where the bevel will terminate (I use a combination square). If you use a marking gauge on the face, you'll create scratches, and pencil lines are more easily planed away. Use a marking gauge along the edges to mark the final thickness, which is determined by the width of the groove into which it must fit.

I always start with the long grain and plane away the area between the pencil and marking gauge lines . If you start with the cross grain, it's possible to create tearout on the long grain edge that can't easily be repaired.

Planing crossgrain toward the bevel you created along the length of the board avoids tearout. (photo #3)

I use two planes for this task. One has a more open throat and can take a bigger bite. Ironically, it's the smoother plane I made, but because it's applewood, which twists and shifts like a little kid during church service, I have had to flatten the sole enough times that the mouth is too wide for a fine shaving. I could patch it and reopen the throat, but it's beneficial to have a designated plane for faster stock removal.

My jack plane (maple) can produce thinner shavings, so once I'm close to the lines, I run it across the bevel a few times to leave a finished surface.

For the drawer itself, if you build it so that you can slide the drawer bottom in from the back after the drawer is assembled, you can use a drawer jig to clean up the outside, easily remove glue from the inside walls, and add finish to the drawer bottom before you slide it in place . A small brass screw at the back edge adds the finishing touch.

The last photo shows 2 drawers from my tool cabinet that was built almost 4 years ago. The back and bottom of the drawers (on the right, and made from cherry) never see light. And notice how much lighter in color they are compared to the drawer front. In just a few years, the drawer fronts (also cherry) are nearly as dark as the walnut sides, even though the drawer fronts themselves rarely see light since there are doors on my tool cabinet.

PATINA

PATINA is the Potomac Antique Tools and Industries Association, Inc., an antique tool club, located in the Washington, D.C. area. The cost of membership is just $12/year. That includes bimonthly meetings which start with some tailgating (around 10:00 a.m.) and a short tool auction at 11:00 a.m., followed by guest speaker. The most recent speakers were professional furniture makers who presented some of their pieces and demonstrated woodworking techniques.

With membership, you also get a bi-monthly newsletter that recaps the previous meeting.

PATINA also hosts a yearly Spring Auction and Dealer Tool Sale in Maryland, this year on Saturday, March 14. Admission is FREE and the dealer sale/auction is open to the public. The dealers' sale starts at 9:00 a.m. and the auction starts at 2:00 p.m.

My grumpy friend, Scott, says that one of the best parts of the event is the tailgating, where you can find some great deals.  Among other things, he bought an antique turning saw, in pristine condition, for [I'm pretty sure] $25.  Tailgating begins prior to the dealer show, whenever people show up, usually around 6:30 a.m.

I'm going to try to make it to the tailgating this year but that requires getting up at 3:30 a.m. I didn't even know there was a 3:30 a.m. Maybe see you there! I'll be the one with half-closed eyelids and a can of Diet Code Red Mountain Dew in both hands.

Ice Cream Flavors for Woodworkers

Plane Vanilla
Chocolate WoodChip
Chocolate Chip Cookie Dado
Chocolate Chip Breaker
English Dovetail Toffee
Sawberry Cheese Rake
Banana Split Nut
NeaFrenchPolishtan
Curly Cherry Swirl
Moxonmallow Fluff
Marshmallet Créme
Chocolate Measure Mint
Orange Fleamscicle
Fudge Rip-ple
Grainola Crunch
Fruit Coffin Smoothie
TeNon Pareil
Rabbet Tracks...with raisins
Rasp-berry Sher-Bit
Pistachiogee

Woodworking Schools

I'm a big fan of woodworking schools. Watching a master woodworker show his or her techniques in person where you can ask questions and where they can look over your shoulder and tweak your actions has proven to be invaluable in improving my skills.

And just as soon as I hit the lottery, I plan to become a full-time ww student.

So far, I've taken classes at Olde Mill Cabinet Shoppe, Cedar Lakes Conference Center, The Woodworks Shows, and Woodcraft. Each one has been well worth the cost and time. And two things in particular I've found to be true: 1) even if you think you know the subject well, you will always learn something new, and 2) even if you take a woodworking class you think you might not like*—whatever you learn will prove to be useful somewhere along your woodworking journey.

A friend took a class at Marc Adams School of Woodworking and says it was one of the best experiences of his life. Another friend has taken classes at Country Workshops and highly recommends it. Someone else just told me about the John C. Campbell Folk School which looks like lots of fun.

The Center for Furniture Craftsmanship is on my list of places where I plan to take classes someday. And I hear that Roy Underhill is soon to open his own school. (I am so there.)

If you've had good experiences at woodworking schools, I'd like to hear your thoughts and recommendations.

Note added 2.24.09: Links to all of your recommendations can be found on the links page in the side bar.

*I wasn't so sure I'd like chip carving, but was proven wrong. Plus, I learned another way to sharpen.

The photo above is a cherry plate I turned in class yesterday (without finish) and a poplar lidded box I turned in class last week.

Box O'Moulding

With the useasonably warm weather we've been having, my thoughts are turning to spring.

And every spring, I take an inventory of and vow to complete the mountainous list of unfinished projects in the house.

One project, a tall bookcase built and installed a year and a half ago, has yet to receive its crown moulding.

It's functional and loaded with books, but it was never meant to have a pine accent piece along the top edge.

A few years ago, any time I had to cut moulding, I started dropping offcuts into a box. Now when a project calls for crown moulding, rather than sketch something or refer to books, I stack a few pieces together until the right look is achieved.

It helps if you have pieces with the moulding profile cut along one edge and one end. That way, you can see how it will look on the corner of your project. 

You can also view the stacked profile by using a board of contrasting color as an upright stop.

Since the box o' moulding is now sitting on my workbench and staring at me, I have no excuse not to finish that bookcase . . . unless, of course, winter decides it's not through with us yet.

Hammer Time

A friend sent this video to me.  It's called "The Hammer Guy."

I prefer to call it: 

"Something a woman would never do, 

not even for a million bazillion dollars 

or a lifetime supply of Ben & Jerry's ice cream."

Some thoughts came to mind after watching the video:

I wonder if he pounded a few before coming up with this trick.

I wonder how long it took him to build this house.

I wonder what his technique is for sawing 2 x 4s.

Hammer Guy, you're amazing. I tip my hard hat to you.